DID YOU KNOW?

• Most all gas today has Ethanol mixed in before it gets to your favorite gas station. Ethanol is from corn, corn is organic and left in the fuel tank, fuel lines, fuel throttle bodies of fuel injection, and carburetors WILL cause problems! The smaller the carbs, the smaller the holes in the jets. Fuel turns to a gel and stops up everything easily and very quickly – in just a few weeks if not in a properly treated fuel system. Not treating fuel with some type of fuel stabilizer will cost you big bucks.
• It is very inexpensive to do a little preventative maintenance. As my grandmother used to tell me “Boy, an ounce of prevention is worth a pound of cure”! Take the time to mix 1 oz. of stabilizer to 1 gallon of fuel. Let the machine run for 5 minutes to coat the inside of the fuel system. This will do several things for the fuel system: 1) it keeps the octane higher for easy starts. 2) it keeps algae from building up and sticking to the metal parts of your tank fuel lines, fuel injectors, throttle bodies and jets in the carbs and 3) best of all it will save you money! If you plan to store for months, run the engine with stabilizer for 5 minutes, then drain out all the fuel in the system. If you do leave gas in the tank, be sure and fill it to the brim. This keeps down oxidation (rust) and keeps condensation from building up and making you an expensive mess to fix.
• Don’t forget your battery – again, an ounce of prevention is worth a pound of cure! Buy a battery tender and install on your unit – either use permanent quick disconnects hook-up or gator clips to the battery terminal. This uses very little electricity and will save that expensive battery. Then, when you do get a day to ride/drive your unit, you can hit the button and go!
• Spark plugs get coated with bad fuel which keeps the plug from firing. Similar to a spill in an oven, when "stuff" gets baked on. This causes the engine not to fire and drain the battery, too. Another good reason to use a battery tender.

Hager Cycle World offers a wide variety of motorcycle and ATV service work, including service on all styles and types of motorcycles (cruisers, sport bikes, touring, dirt and more), ATVs, UTVs, mopeds and scooters.  We can accommodate most all repairs and service needs such as mechanical, warranty, collision repairs and routine maintenance.

Our Factory Certified Repair Technicians provide Certified Warranty services for all our brands and styles including:

• Honda Motorcycle Warranty Repairs
• Honda ATV Warranty Repairs
• Kawasaki Motorcycle Warranty Repairs
• Kawasaki ATV Warranty Repairs
• Kawasaki UTV Warranty Repairs
• Kawasaki Watercraft Warranty Repairs
• KTM Motorcycle Warranty Repairs
• Polaris ATV Warranty Repairs
• Polaris UTV Warranty Repairs
• Suzuki Motorcycle Warranty Repairs
• Suzuki ATV Warranty Repairs
• Kymco ATV and UTV Warranty Repairs
• Husqvarna Motorcycle Warranty Repairs

Regardless if you live in NC, SC or are just passing through, stop in and visit our Service and Parts department.   We stock 1000s of parts in our Parts & Accessories department and can have most special orders in a day or two.  

We also offer Extended Service Contracts for most of our motorcyles and can provide peace of mind long after the sale.  Extended Service Contracts are an affordable insurance policy against expensive future repairs. 

Give Us A Call or Click Below To Schedule Your Appointment Today! 

STORE HOURS
Monday	Gone Riding!
Tuesday	9:00AM - 6:00PM
Wednesday	9:00AM - 6:00PM
Thursday	9:00AM - 6:00PM
Friday	9:00AM - 6:00PM
Saturday	9:00AM- 3:00PM
Sunday	Gone Riding!

Phone: (803) 324-8800